Removing The Cover Support Element; Removing The - APRILIA SR 50 - 2003 Manual

2
1
REMOVING THE COVER
SUPPORT ELEMENT
Carefully read p. 44 (MAINTENANCE).
◆ Position the vehicle on the centre stand,
see p. 43 (POSITIONING THE VEHICLE
ON THE STAND).
◆ Rotate the handlebar completely, unscrew
and remove the screws (1).
◆ Remove the cover support element (2).
NOTE
Upon reassembly, fit the tangs
correctly in the appropriate seats.
4
5
REMOVING THE FRONT
COVER
Carefully read p. 44 (MAINTENANCE).
◆ Remove the cover support element (2),
see beside (REMOVING THE COVER
SUPPORT ELEMENT).
◆ Rotate the handlebar completely, unscrew
and remove the screws (3).
CAUTION
Proceed with care.
Do not damage the tangs and/or their seats.
Handle the plastic and painted components
with care and avoid scraping or damaging
them.
◆ Remove the front cover (4), by pulling it
upwards.
3
6
6
NOTE
Upon reassembly, correctly insert
the lower tang (5) and then the four side
tangs (6) in their seats.
use and maintenance SR 50
55