Figure 34 Network > Wan > More Connections: Edit; Table 20 Network > Wan > More Connections: Edit - ZyXEL Communications P-660HN User Manual

Figure 34 Network > WAN > More Connections: Edit
The following table describes the labels in this screen.
Table 20 Network > WAN > More Connections: Edit
LABEL
General
Active
Name
Mode
Encapsulation
P-660HN-Fx User's Guide
DESCRIPTION
Select the check box to activate or clear the check box to deactivate this
connection.
Enter a unique, descriptive name of up to 13 ASCII characters for this
connection.
Select Routing from the drop-down list box if your ISP allows multiple
computers to share an Internet account.
If you select Bridge, the ZyXEL Device will forward any packet that it does
not route to this remote node; otherwise, the packets are discarded.
Select the method of encapsulation used by your ISP from the drop-down
list box. Choices vary depending on the mode you select in the Mode field.
If you select Bridge in the Mode field, select either PPPoA or RFC 1483.
If you select Routing in the Mode field, select PPPoA, RFC 1483, ENET
ENCAP or PPPoE.
Chapter 5 WAN Setup
77