Chapter 7 Wireless LAN
The following table describes the labels in this screen.
Table 33 Network > Wireless LAN > AP: Advanced Setup
LABEL
RTS/CTS
Threshold
Fragmentation
Threshold
Output Power
Preamble
IGMP
Snooping
Back
Apply
Cancel
7.2.6 MAC Filter
Use this screen to change your ZyXEL Device's MAC filter settings. Click the Edit button in
the AP screen. The screen appears as shown.
Figure 54 Network > Wireless LAN > AP: MAC Address Filter
114
DESCRIPTION
Enter a value between 0 and 2432.
This is the maximum data fragment size that can be sent. Enter a value between 256
and 2432.
Set the output power of the ZyXEL Device. If there is a high density of APs in an area,
decrease the output power to reduce interference with other APs. Select one of the
following Maximum, Middle or Minimum.
Select a preamble type from the drop-down list menu. Choices are Long, Short or
Dynamic. The default setting is Long. See the appendix for more information.
Select this option to enable IGMP snooping on your ZyXEL Device.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
P-660HN-Fx User's Guide