Table of Contents
Advertisement
Chapter 23 Product Specifications
Table 127 Firmware Specifications (continued)
Other Protocol Support
Management
23.3 Wireless Features
Table 128 Wireless Features
External Antenna
Wireless LAN MAC Address
Filtering
WEP Encryption
Wi-Fi Protected Access
WPA2
308
PPP (Point-to-Point Protocol) link layer protocol
IP routing
Transparent bridging for unsupported network layer protocols
RIP I/RIP II
ICMP
ATM QoS
SNMP v1 and v2c with MIB II support (RFC 1213)
IP Multicasting IGMP v1, v2 and v3
IGMP Proxy
802.1Q/1P
Embedded Web Configurator
CLI (Command Line Interpreter)
SNMP v1 & v2c with MIB II
Embedded FTP/TFTP Server for firmware upgrade and configuration file
backup and restore
Telnet for remote management
Remote Management Control: Telnet, FTP, Web, SNMP and DNS.
Remote Firmware Upgrade
Syslog
TR-069
F4/F5 OAM
The ZyXEL Device is equipped with two fixed antenna to provide a
clear radio signal between the wireless stations and the access
points.
Your device can check the MAC addresses of wireless stations
against a list of allowed or denied MAC addresses.
WEP (Wired Equivalent Privacy) encrypts data frames before
transmitting over the wireless network to help keep network
communications private.
Wi-Fi Protected Access (WPA) is a subset of the IEEE 802.11i
security standard. Key differences between WPA and WEP are user
authentication and improved data encryption.
WPA 2 is a wireless security standard that defines stronger
encryption, authentication and key management than WPA.
P-660HN-Fx User's Guide
Advertisement
Table of Contents
Troubleshooting
