The Restart Screen; Figure 182 Configuration Upload Error; Figure 183 Reset Warning Message; Figure 184 Reset In Process Message - ZyXEL Communications P-660HN User Manual

Figure 182 Configuration Upload Error

Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the
ZyXEL Device to its factory defaults. The following warning screen appears.

Figure 183 Reset Warning Message

Figure 184 Reset In Process Message

You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to

21.4 The Restart Screen

System restart allows you to reboot the ZyXEL Device remotely without turning the power
off. You may need to do this if the ZyXEL Device hangs, for example.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.
P-660HN-Fx User's Guide
Section 1.6 on page 36 for more information on the RESET button.
Chapter 21 Tools
297