Table of Contents
Related Manuals for ZyXEL Communications P-660HNU-Tx
Summary of Contents for ZyXEL Communications P-660HNU-Tx
- Page 1 P-660HNU-Tx Wireless N ADSL2+ 4-port Gate- way with USB Firmware v1.02 Edition 1, 11/2011 DEFAULT LOGIN DETAILS IP Address: http://192.168.1.1 User: admin Password: 1234 Copyright 2011 ZyXEL Communications Corporation www.zyxel.com...
- Page 2 Device Panels WPS/WLAN BUTTON ON/OFF WPS/WLAN RESET BUTTON INTERNET POWER USB PORT LAN1-4 LAN PORT 1-4 POWER DSL PORT...
-
Page 3: Package Contents
P-660HNU-Tx Overview The P-660HNU-Tx (x stands for 1 or 3) is an ADSL router with a four-port built-in Ethernet switch and IEEE 802.11n 2x2 wireless capability. The P- 660HNU-Tx allows wired and wireless clients to safely access the Internet. With 802.11n 2x2, the P-660HNU-Tx can transfer at data rates up to 300Mbps, with extended range. -
Page 4: Hardware Connections
Hardware Connections This section shows you how to set up your P-660HNU-Tx. Warning: Remove any clear plastic covers from the P-660HNU-Tx before using it. Also, do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric... -
Page 5: Internet Access Setup
P-660HNU-Tx 1. DSL: Use a telephone wire to connect your P-660HNU-Tx’s DSL port to a telephone jack (or to a splitter, if one is already installed). 2. LAN: Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/or Internet access. - Page 6 If one or both of these lights are not on, try turning the P-660HNU-Tx off, check the connections, wait a few seconds and then turn it back on. If the DSL light is not on, contact your service provider. If the DSL light is on but the INTERNET light is not, you need to enter your Internet access configuration using the Web Configurator - see page 7.
-
Page 7: The Web Configurator
The Web Configurator The Web Configurator is a web browser tool that allows you to configure the P-660HNU-Tx. The computer and the P-660HNU-Tx need to be in the same IP address range to use this tool. 1. In your browser, go to http://192.168.1.1. - Page 8 3. The following screen displays if you have not yet changed your password. It is strongly recommended you change the default password. Enter a new password, retype it to confirm and click Apply; alternatively click Ignore to proceed to the main menu if you do not want to change the password now.
- Page 9 P-660HNU-Tx 5. Click INTERNET/WIRELESS SETUP. Wait while your P-660HNU-Tx tries to detect your DSL connection. 6. Follow the directions in the wizard. Enter the settings as specified by your ISP. For more details on using the wizard for Internet configuration, see Internet and Wireless Wizard Setup in the User’s...
- Page 10 7. If you selected Go to Advanced setup, the Status screen displays. 8. If the INTERNET light is off, the Internet connection can be manually configured. • To configure the Internet connection, go to Network > WAN • To configure wireless access, go to Network > Wireless LAN •...
-
Page 11: Troubleshooting
LAN port, follow these steps. a. Check the lights on the front panel. If they are different from what is described on page 5, make sure the P-660HNU-Tx is correctly connected. If the lights are still different, turn off the device, wait a few seconds, and turn it on again. - Page 12 If you see the login screen, follow suggestions above. If you do not, go to the next step. b. Make sure your P-660HNU-Tx and your computer are using the same wireless and wireless security settings. Viewing Certification(s) • Go to www.zyxel.com.