Chapter 21 Tools
The following table describes the labels in this screen.
Table 122 Maintenance > Tools > Firmware
LABEL
Current
Firmware
Version
File Path
Browse...
Upload
After you see the Firmware Upload in Progress screen, wait two minutes before logging into
the ZyXEL Device again.
Figure 176 Firmware Upload In Progress
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 177 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
294
DESCRIPTION
This is the present Firmware version and the date created.
Type in the location of the file you want to upload in this field or click Browse ... to
find it.
Click this to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click this to begin the upload process. This process may take up to two minutes.
P-660HN-Fx User's Guide