Wpa(2)-Psk; Figure 50 Network > Wireless Lan > Ap: Wep Auto; Table 30 Network > Wireless Lan > Ap: Wep Auto - ZyXEL Communications P-660HN User Manual

Chapter 7 Wireless LAN
Figure 50 Network > Wireless LAN > AP: WEP Auto
The following table describes the wireless LAN security labels in this screen.
Table 30 Network > Wireless LAN > AP: WEP Auto
LABEL
Security Mode
Passphrase
WEP Key

7.2.3 WPA(2)-PSK

Use this screen to configure and enable WPA(2)-PSK authentication. Click Network >
Wireless LAN to display the AP screen. Select WPA-PSK, WPA2-PSK or WPAPSKMixed
from the Security Mode list.
110
DESCRIPTION
Choose WEP Auto from the drop-down list box.
Enter a passphrase (up to 32 printable characters) and click Generate. The ZyXEL
Device automatically generates a WEP key.
The WEP key is used to encrypt data. Both the ZyXEL Device and the wireless
stations must use the same WEP key for data transmission.
If you want to manually set the WEP key, enter any 5 or 13 characters (ASCII string)
or 10 or 26 hexadecimal characters ("0-9", "A-F") for a 64-bit or 128-bit WEP key
respectively.
P-660HN-Fx User's Guide