Table of Contents
Advertisement
Chapter 17 Remote Management
17.4 The FTP Screen
You can use FTP (File Transfer Protocol) to upload and download the ZyXEL Device's
firmware and configuration files. Please see the User's Guide chapter on firmware and
configuration file maintenance for details. To use this feature, your computer must have an
FTP client.
Use this screen to specify which interfaces allow FTP access and from which IP address the
access can come. To change your ZyXEL Device's FTP settings, click Advanced > Remote
MGMT > FTP. The screen appears as shown.
Figure 147 Advanced > Remote Management > FTP
The following table describes the labels in this screen.
Table 92 Advanced > Remote Management > FTP
LABEL
Port
Access Status
Secured Client IP A secured client is a "trusted" computer that is allowed to communicate with the
Apply
Cancel
17.5 The SNMP Screen
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your ZyXEL Device supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL
Device supports SNMP version one (SNMPv1) and version two (SNMPv2). The next figure
illustrates an SNMP management operation.
248
DESCRIPTION
You may change the server port number for a service, if needed. However, you
must use the same port number in order to use that service for remote
management.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
P-660HN-Fx User's Guide
Advertisement
Table of Contents
Troubleshooting
