ZyXEL Communications P-660HN User Manual page 43

Table 3 Navigation Panel Summary
LINK TAB
Firewall General
Rules
Threshold
Content Filter Keyword
Schedule
Trusted
Packet Filter
Certificates My Certificates
Trusted CAs
Trusted Remote
Hosts
Directory
Servers
Advanced
Static Route
802.1Q/1P Group Setting
Port Setting
QoS General
Class Setup
Monitor
Dynamic DNS
Remote MGMT WWW
Telnet
FTP
SNMP
DNS
ICMP
P-660HN-Fx User's Guide
Chapter 2 Introducing the Web Configurator
FUNCTION
Use this screen to activate/deactivate the firewall and the default action to
take on network traffic going in specific directions.
This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Use this screen to configure the thresholds for determining when to drop
sessions that do not become fully established.
Use this screen to block access to web sites containing certain keywords in
the URL.
Use this screen to set the days and times for your device to perform content
filtering.
Use this screen to exclude a range of users on the LAN from content
filtering.
Use this screen to configure the rules for protocol and generic filter sets.
Use this screen to generate and export self-signed certificates or
certification requests and import the ZyXEL Device's CA-signed certificates.
Use this screen to save CA certificates to the ZyXEL Device.
Use this screen to import self-signed certificates.
Use this screen to configure a list of addresses of directory servers (that
contain lists of valid and revoked certificates).
Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
Use this screen to activate 802.1Q/1P, specify the management VLAN
group, display the VLAN groups and configure the settings for each VLAN
group.
Use this screen to configure the PVID and assign traffic priority for each
port.
Use this screen to enable QoS and traffic prioritizing, and configure
bandwidth management on the WAN.
Use this screen to define a classifier.
Use this screen to view each queue's statistics.
This screen allows you to use a static hostname alias for a dynamic IP
address.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
Use this screen to configure your ZyXEL Device's settings for Simple
Network Management Protocol management.
Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
Use this screen to set whether or not your device will respond to pings and
probes for services that you have not made available.
43