Table of Contents
Advertisement
C
H A P T E R
This chapter gives details about your P-330W's hardware and firmware features.
10.1 General P-330W Specifications
The following tables summarize the P-330W's hardware and firmware features.
Table 51 Hardware Specifications
SPECIFICATION
Product Name
Dimensions (W x D x H)
Weight
Power
Ethernet Ports 1-5
LEDs
Reset Button
Antenna
Operating Environment
Storage Environment
Distance between the
centers of the holes on
the device's back.
Screw size for wall-
mounting
Approvals
P-330W User's Guide
Product Specifications
DESCRIPTION
P-330W, P-330W v2
159 x 107 x 25 mm
0.50 lbs 224.5g
DC: 800mA max, 12 Watt consumption. There is no tolerance for the DC
input voltage.
Auto-negotiating: 10 Mbps or 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
PWR/SYS, WAN, WLAN, LAN1-4
The reset button is built into the rear panel. Use this button to restore the P-
330W to its factory default settings. Press for 1 second to restart the device.
Press for 5 seconds to restore to factory default settings.
The P-330W is equipped with a 2dBi detachable antenna to provide clear
radio transmission and reception on the wireless network.
Temperature: -10º C ~ 55º C
Humidity: 20% ~ 95% RH (Non-condensing)
Temperature: -20º C ~ 70º C
Humidity: 5% ~ 90% RH (Non-condensing)
125 mm
M4
FCC Part15B Class B, ICES-003, NCC, RSS-210
10
123
Advertisement
Table of Contents
Troubleshooting
