Chapter 10 Product Specifications
3 Do not insert the screws all the way into the wall. Leave a small gap of about 0.5 cm
between the heads of the screws and the wall.
4 Make sure the screws are snugly fastened to the wall. They need to hold the weight of
the P-330W with the connection cables.
5 Align the holes on the back of the P-330W with the screws on the wall. Hang the P-
330W on the screws.
Figure 75 Wall-mounting Example
The following are dimensions of an M4 tap screw and masonry plug used for wall mounting.
All measurements are in millimeters (mm).
Figure 76
126
Masonry Plug and M4 Tap Screw
P-330W User's Guide