Appendix A Product Specifications - ZyXEL Communications NBG4615 User Manual

The following tables summarize the NBG4615's hardware and firmware features.
Table 91 Hardware Features
Dimensions
Weight
SDRAM
Flash Memory
Power Specification
Ethernet ports
Built-in Switch
LEDs
Reset button
WPS button
Power switch
WLAN switch
Antenna
USB Port
Operation Environment
Storage Environment
NBG4615 User's Guide
A
Product Specifications
162 mm (W) x 106 mm (D) x 28 mm (H)
285g
32 MB
8 MB
Input: 100~240 AC, 50~60 Hz
Output: 12 V DC 1.5A
Auto-negotiating: 100 Mbps, 1000 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
A combination of switch and router makes your NBG4615 a cost-effective
and viable network solution. You can add up to two computers to the
NBG4615 without the cost of a hub when connecting to the Internet
through the WAN port. You can add up to three computers to the NBG4615
when you connect to the Internet in AP mode. Add more than four
computers to your LAN by using a hub.
Power, LAN1-4, WAN, Internet/WPS, USB1-2
The reset button is built into the rear panel. Use this button to restore the
NBG4615 to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
Turn on or turn off the power of the NBG4615 using this switch.
Turn on or turn off the wireless function of the NBG4615 using this switch.
There is no need to go into the Web Configurator.
The NBG4615 is equipped with two 2dBi (2.4GHz) detachable antenna to
provide clear radio transmission and reception on the wireless network.
The NBG4615 has two built-in USB 2.0 type A for USB device connectivity
and supports 3G USB dongle.
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 10% ~ 90%
Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 10% ~ 95%
PP EN D I X
A
233