Chapter 7 Advanced Options
Figure 53 Advanced: Virtual Servers
The following table describes the labels in this screen.
Table 32 Advanced: Virtual Servers
LABEL
Enable Virtual
Servers
Servers
Local IP Address Enter the inside IP address of the server here.
Protocol
Port Range
Description
Save
Reset
90
DESCRIPTION
Put a check in the box to enable Virtual Servers
By selection an option in the pull down menu, the P-330W will automatically
populate the settings for the corresponding service.
You can select to forward TCP, UDP, or both type of traffic.
Enter a port number here. To forward only one port, enter it again in the End Port
field. To specify a range of ports, enter the last port to be forwarded in the End Port
field.
Enter in a description for this Virtual Server.
Click Save to save your changes back to the P-330W.
Click Reset to begin configuring this screen afresh.
P-330W User's Guide