• IP address of 192.168.10.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 33 client IP addresses starting from 192.168.10.33.
These parameters should work for the majority of installations. If your ISP gives you explicit
DNS server address(es), read the embedded web configurator help regarding what fields need
to be configured.
5.3.6 IP Address and Subnet Mask
Refer to the IP Address and Subnet Mask section in the Wizard Setup chapter for this
information.
5.3.7 Configuring IP
Click LAN to open the IP screen.
Figure 20 LAN IP Setup
The following table describes the labels in this screen.
Table 14 LAN IP Setup
LABEL
IP Address
Subnet Mask
P-330W User's Guide
DESCRIPTION
Type the IP address of your P-330W in dotted decimal notation 192.168.10.1
(factory default).
The subnet mask specifies the network number portion of an IP address. Your P-
330W will automatically calculate the subnet mask based on the IP address that
you assign. Unless you are implementing subnetting, use the subnet mask
computed by the P-330W 255.255.255.0.
Chapter 5 System Screens
53