Table of Contents
Advertisement
Chapter 7 Advanced Options
7.7.1 Static IP Encapsulation
The screen shown next is for Static IP encapsulation.
Figure 55 Advanced: WAN Static IP Encapsulation
The following table describes the labels in this screen.
Table 34 Advanced: WAN Static IP Encapsulation
LABEL
WAN Access Type
IP Address
Subnet Mask
Default Gateway
DNS 1 - 3
Clone MAC
Address
Respond to WAN
Ping
Enable UPnP
IPSec
Passthrough
PPTP Passthrough Put a check in this box to enable computers on your LAN to make PPTP VPN
92
DESCRIPTION
You must choose the Static IP option when the WAN port is used as a regular
Ethernet with a fixed IP address.
Enter your WAN IP address in this field.
Type your network's IP subnet Mask.
Type the default gateway assigned to you by your ISP.
Enter in your ISP's DNS server IP address here. You must enter in 1.
Your ISP may require a particular MAC address in order for you to connect to the
Internet. This MAC address is the PC's MAC address that your ISP had originally
connected your Internet connection to. Type in this Clone MAC address in this
section to replace the WAN MAC address with the MAC address of that PC.
Put a check in this box to reply to ping packets.
UPnP (Universal Plug and Play) allows automatic discovery and configuration of
the Wireless Router. UPnP is by supported by Windows ME, XP, or later. Put a
check in this box to allow the router configuration to be changed by UPnP
devices.
Put a check in this box to enable computers on your LAN to make IPSec VPN
connections to servers on the Internet.
connections to servers on the Internet.
P-330W User's Guide
Advertisement
Table of Contents
Troubleshooting
