Product Specifications - ZyXEL Communications NBG-417N User Manual

The following tables summarize the NBG-417N's hardware and firmware features.
Table 67 Hardware Features
Dimensions (W x D x H)
Weight
Power Specification
Ethernet ports
4-5 Port Switch
LEDs
Reset Button
WPS button
Antenna
Operation Environment
Storage Environment
Table 68 Firmware Features
FEATURE
Default LAN IP Address
Default LAN Subnet Mask
Default Password
DHCP Pool
Wireless Interface
NBG-417N User's Guide
C
HAPTER

Product Specifications

140 mm x 110 mm x 30 mm
190 g
Input: 120~240 AC, 50~60 Hz
Output: 12 V DC 1A
Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-duplex
mode.
Auto-crossover: Use either crossover or straight-through Ethernet cables.
You can use either straight-through or crossover Ethernet cables (MDI/
MDI-X support) to connect multiple computers or servers (for example,
game servers) in your network to the NBG-417N.
You can add up to four computers to the NBG-417N without the cost of a
hub when connecting to the Internet through the WAN port. You can add
up to five computers to the NBG-417N when you connect to the Internet in
AP mode. Add more than four computers to your LAN by using a hub.
PWR, LAN1-4, WAN, WLAN/WPS
The reset button is built into the rear panel. Use this button to restore the
NBG-417N to its factory default settings. Press for 1 second to restart the
device. Press for 5 seconds to restore to factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds for a
security-enabled wireless connection.
The NBG-417N is equipped with a 2dBi (2.4GHz) detachable antenna to
provide clear radio transmission and reception on the wireless network.
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%
DESCRIPTION
192.168.1.1 (router)
192.168.1.2. (AP)
255.255.255.0 (24 bits)
1234
192.168.1.33 to 192.168.1.64
Wireless LAN
2 5
175