Product Specifications - ZyXEL Communications NBG4604 User Manual

C
H A P T E R
The following tables summarize the NBG4604's hardware and firmware features.
Table 74 Hardware Features
Dimensions (W x D x
H)
Weight
Power Specification
Ethernet ports
4-5 Port Switch
LEDs
Reset Button
WPS button
Antenna
Operation
Environment
Storage Environment
NBG4604 User's Guide

Product Specifications

140 mm x 110 mm x 30 mm
190 g
Input: 100-240 AC, 50/60 Hz
Output: 12 V DC 1A
Auto-negotiating: 10/100/1000 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
A combination of switch and router makes your NBG4604 a cost-
effective and viable network solution. You can add up to four
computers to the NBG4604 without the cost of a hub when
connecting to the Internet through the WAN port. You can add up
to five computers to the NBG4604 when you connect to the
Internet in AP mode. Add more than four computers to your LAN
by using a hub.
PWR, LAN1-4, WAN, WLAN, WPS
The reset button is built into the rear panel. Use this button to
restore the NBG4604 to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds
for a security-enabled wireless connection.
The NBG4604 is equipped with a 2dBi (2.4GHz) detachable
antenna to provide clear radio transmission and reception on the
wireless network.
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%
25
209