Figure 43 Wireless: Wps; Table 27 Wireless: Wps - ZyXEL Communications P-330W - V1.90 User Manual

Chapter 6 Wireless

Figure 43 Wireless: WPS

The following table describes the labels in this menu.

Table 27 Wireless: WPS

LABEL
Disable WPS
WPS Status
Self-PIN
Number
Regenerate
PIN
Start PBC
Save
Reset
Current Key
Info
Authenticatio
n
Encryption
Key
Client PIN
Number
Start PIN
80
DESCRIPTION
Click this check box to disable WPS.
This displays the current WPS configuration status. If no wireless settings (such as
security settings) are configured Unconfigured is selected. Once the WPS process is
complete, Configured is selected.
This is the PIN (Personal Identification Number) the P-330W uses to authenticate other
WPS-enabled wireless devices. The PIN is not necessary when using WPS's push-
button method.
Enter this PIN in the configuration utility of the device you want to connect to using
WPS. You may need to write this down.You can generate a new one by clicking
Regenerate PIN.
Click this to have the P-330W use a different WPS PIN. The new PIN is automatically
generated. The P-330W uses the new PIN once you click Save.
To connect additional devices to your P-330W using WPS you can use the same PIN
again or generate a new one for each setup procedure.Click Regenerate PIN to
generate another PIN number. The number will be displayed in the Self-PIN number
field.
Click Start PBC to begin the WPS push button configuration method.
Click Save to store the current Self-PIN number.
Click Reset to clear the Self-PIN number to the previous PIN number.
These fields display information on your current wireless security settings.
This field displays the current method of wireless security such as WPA or WPA2 PSK
for example.
This field displays the type of encryption being used for your current wireless security
settings.
This field displays the current pass key.
Enter the WPS PIN number from the wireless client into this field. You can find this PIN
either on the device itself or in the configuration utility for the device.
Click Start PIN to begin the PIN method of configuration.
P-330W User's Guide