Back To Factory Defaults; Logs; Figure 66 Administrator: Logs; Table 44 Administrator: Remote Management - ZyXEL Communications P-330W - V1.90 User Manual

8.2.3 Back to Factory Defaults

Pressing the Restore Defaults button in this section clears all user-entered configuration
information and returns the P-330W to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory defaults of your P-
330W. Refer to the Introducing the Web Configurator chapter for more information on the
RESET button.

8.3 Logs

The Logs record various types of activity on the Wireless Router. This data is useful for
troubleshooting, but enabling all logs will generate a large amount of data and adversely affect
performance.
To access the Logs configuration screen, click ADMINISTRATOR then the LOGS link. The
screen appears as shown.

Figure 66 Administrator: Logs

The following table describes the labels in this screen.

Table 44 Administrator: Remote Management

LABEL
Enable Log
System All
P-330W User's Guide
DESCRIPTION
Activates the logging function.
Activates all logging functions.
Chapter 8 Administrator Options
107