Troubleshooting; Chapter 9 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications P-330W - V1.90 User Manual

C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• P-330W Access and Login
• Reset the P-330W to Its Factory Defaults
• Wireless LAN Troubleshooting
9.1 Power, Hardware Connections, and LEDs
The P-330W does not turn on. None of the LEDs turn on.
1 Make sure the P-330W is turned on.
2 Make sure you are using the power adaptor or cord included with the P-330W.
3 Make sure the power adaptor or cord is connected to the P-330W and plugged in to an
appropriate power source. Make sure the power source is turned on.
4 Turn the P-330W off and on.
5 Disconnect and re-connect the power adaptor or cord to the P-330W.
6 If the problem continues, contact the vendor.
The ALARM/ALM LED is on.
1 Turn the P-330W off and on.
2 Disconnect and re-connect the power adaptor to the P-330W.
3 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
P-330W User's Guide

Troubleshooting

9
117