Product Specifications And Wall-Mounting Instructions - ZyXEL Communications NBG-460N User Manual

C
H A P T E R
Product Specifications and Wall-
The following tables summarize the NBG-460N's hardware and firmware features.
Table 115 Hardware Features
Dimensions (W x D x
H)
Weight
Power Specification
Ethernet ports
4-5 Gigabit Port
Switch
LEDs
Reset Button
WPS button
Antenna
Operation
Environment
Storage Environment
NBG-460N User's Guide
Mounting Instructions
190 x 150 x 33 mm
362g
Input: 120~240 AC, 50~60 Hz
Output: 18 V DC 1A
Auto-negotiating: 10 Mbps, 100 Mbps or 1000Mbps in either half-
duplex or full-duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
A combination of switch and router makes your NBG-460N a cost-
effective and viable network solution. You can add up to four
computers to the NBG-460N without the cost of a hub when
connecting to the Internet through the WAN port. You can add up
to five computers to the NBG-460N when you connect to the
Internet in AP mode. Add more than four computers to your LAN
by using a hub.
PWR, LAN1-4, WAN, WLAN, WPS
The reset button is built into the rear panel. Use this button to
restore the NBG-460N to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds
for a security-enabled wireless connection.
The NBG-460N is equipped with three 2dBi (2.4GHz) detachable
antennas to provide clear radio transmission and reception on the
wireless network.
Temperature: 0º C ~ 40º C
Humidity: 20% ~ 85% RH (Non-condensing)
Temperature: -20º C ~ 60º C
Humidity: 20% ~ 90% RH (Non-condensing)
27
299