Dhcp Ip Encapsulation; Figure 56 Advanced: Wan Dhcp Ip Encapsulation; Table 35 Advanced: Wan Dhcp Ip Encapsulation - ZyXEL Communications P-330W - V1.90 User Manual

Table 34 Advanced: WAN Static IP Encapsulation
LABEL
L2TP Passthrough
Save
Reset

7.7.2 DHCP IP Encapsulation

The screen shown next is for DHCP IP encapsulation.

Figure 56 Advanced: WAN DHCP IP Encapsulation

The following table describes the labels in this screen.

Table 35 Advanced: WAN DHCP IP Encapsulation

LABEL
WAN Access Type
Release IP
Renew IP
Attain DNS
Automatically
Set DNS Manually
DNS 1 - 3
Clone MAC
Address
Respond to WAN
Ping
P-330W User's Guide
DESCRIPTION
Put a check in this box to enable computers on your LAN to make L2TP VPN
connections to servers on the Internet.
Click Save to save your changes back to the P-330W.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
You must choose the DHCP Client option when the WAN port is used as a regular
Ethernet using DHCP to be assigned an IP address.
Click Release IP to stop using your current IP address.
Click Renew IP to get a new IP address.
Select this if your ISP assigns you a DNS server at the same time it assigns you
an IP Address.
Use this if your ISP does not assign a DNSP server when it assigns you an IP
address.
Enter in your ISP's DNS server IP address here. You must enter in 1.
Your ISP may require a particular MAC address in order for you to connect to the
Internet. This MAC address is the PC's MAC address that your ISP had originally
connected your Internet connection to. Type in this Clone MAC address in this
section to replace the WAN MAC address with the MAC address of that PC.
Put a check in this box to reply to ping packets.
Chapter 7 Advanced Options
93