Chapter 8 Administrator Options
Figure 71 Administrator: Time Zone Setting
The following table describes the labels in this screen.
Table 49 Administrator: Time Zone Setting
LABEL
Current Time
Enable NTP client
update
Time Zone Select
NTP Server
Daylight Saving
Time
Save
Reset
Refresh
8.9 Upgrade Firmware
Find firmware at
"*.bin" extension, e.g., "P-330W.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click Administrator, and then the Upgrade Firmware link. Follow the instructions in this
screen to upload firmware to your P-330W.
112
DESCRIPTION
This field displays the time of your P-330W.
If you are not using an NTP server, you can make changes here and they will be
applied when you click Save.
Put a check in this box to enable the use of an external NTP server.
Choose the Time Zone of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).
Select Auto or Enter the IP address manually. Check with your ISP/network
administrator if you are unsure of this information.
Put a check in this box to enable the use of Daylight Saving Time.
Click Save to save your changes back to the P-330W.
Click Reset to begin configuring this screen afresh.
Click Refresh to display the current time.
www.us.zyxel.com
in a file that (usually) uses the system model name with a
P-330W User's Guide