Appendix A Product Specifications - ZyXEL Communications NBG4115 User Manual

A
P P E N D I X
The following tables summarize the NBG4115's hardware and firmware features.
Table 75 Hardware Features
Dimensions
Weight
SDRAM
Flash Memory
Power Specification
Ethernet ports
Built-in Switch
LEDs
Reset Button
WPS button
Antenna
USB Port
Operation
Environment
Storage Environment
NBG4115 User's Guide
Product Specifications
140 mm (W) x 110 mm (D) x 30 mm (H)
190 g (without a 3G card installed)
32 MB
4 MB
Input: 120~240 AC, 50~60 Hz
Output: 12 V DC 1.25A
Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-
duplex mode.
Auto-crossover: Use either crossover or straight-through Ethernet
cables.
A combination of switch and router makes your NBG4115 a cost-
effective and viable network solution. You can add up to two
computers to the NBG4115 without the cost of a hub when
connecting to the Internet through the WAN port. You can add up
to three computers to the NBG4115 when you connect to the
Internet in AP mode. Add more than four computers to your LAN
by using a hub.
PWR, LAN1-2, 3G, Internet, WAN, WLAN/WPS
The reset button is built into the rear panel. Use this button to
restore the NBG4115 to its factory default settings. Press for 1
second to restart the device. Press for 5 seconds to restore to
factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds
for a security-enabled wireless connection.
The NBG4115 is equipped with a 2dBi (2.4GHz) detachable
antenna to provide clear radio transmission and reception on the
wireless network.
The NBG4115 has one built-in USB 2.0 type A for 3G connectivity.
When a 3G card is plugged in and operational this port functions
as a WAN port.
Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF
Humidity: 20% ~ 90%
Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF
Humidity: 20% ~ 95%
A
221