Figure 57 Advanced: Wan Pppoe Encapsulation; Table 36 Pppoe Encapsulation - ZyXEL Communications P-330W - V1.90 User Manual

Figure 57 Advanced: WAN PPPoE Encapsulation

The following table describes the labels in this screen.

Table 36 PPPoE Encapsulation

LABEL
WAN Access
Type
User Name
Password
Service Name
Connection Type
Idle Time
MTU Size
Attain DNS
Automatically
Set DNS
Manually
DNS 1 - 3
P-330W User's Guide
DESCRIPTION
You must choose the PPPoE option when the WAN port is used with PPPoE.
Type the User Name given to you by your ISP.
Type the password associated with the User Name above.
Type the PPPoE service name provided to you. PPPoE uses a service name to
identify and reach the PPPOE server.
Select Continuous if you do not want the connection to time out.
Select Connect On Demand if you want to only connect when you are sending
data.
Select Manual if you do not with to manually log onto the P-330W via the GUI.
The amount of time before the PPPoE session times out and drops connection.
Enter in the maximum MTU (packet size) here.
Select this if your ISP assigns you a DNS server at the same time it assigns you an
IP Address.
Use this if your ISP does not assign a DNS server when it assigns you an IP
address.
Enter in your ISP's DNS server IP address here. You must enter in 1.
Chapter 7 Advanced Options
95