Pvc Set Command - ZyXEL Communications IES-22A User Manual

Chapter 54 Virtual Channel Management

54.3.2 PVC Set Command

Syntax:
ras> shdsl pvc set <portlist> <vpi> <vci> <super |vid = 1..4094 <priority>>
<DS vcprofile[,US vcprofile]>
where
<portlist>
<vpi>
<vci>
<super |vid
<priority>
DS vcprofile
[,US
vcprofile]>
This command allows the configuration of a PVC (permanent virtual circuit) for one or a
range of DSL ports.
The following example sets a PVC on DSL port 1 with VPI 1, VCI 34, default VID 100
priority 3. It sets the "platinum" profile for downstream traffic shaping and a VC profile
named "plus" for upstream traffic policing.
ras> shdsl pvc set 1 1 34 100 3 platinum,plus
348
You can specify a single DSL port <1>, all DSL ports <*> or a
=
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
The VPI setting can be 0 to 255.
=
The VCI setting can be 32 to 65535 if the vpi is 0 or 1 to 65535
=
if the vpi is not 0.
Enable the super channel option to allow a channel forward
=
frames belonging to multiple VLAN groups (that are not
assigned to other channels). The IES-708-22A forwards frames
belonging to VLAN groups that are not assigned to specific
channels to the super channel. The super channel functions in
the same way as the channel in a single channel environment.
One port can have only one super channel.
The default VID (1 to 4094). Each PVC must have a unique
VID since the IES-708-22A forwards traffic back to the
subscribers based on the VLAN ID.
You must assign a default VID (1 to 4094) and IEEE 802.1p
default priority (0 to 7) to normal channels. Each PVC must
have a unique VID (since the IES-708-22A forwards traffic
back to the subscribers based on the VLAN ID).
This is the priority value (0 to 7) to add to incoming frames
=
without a (IEEE 802.1p) priority tag.
Assign a VC profile to use for this channel's downstream traffic
=
shaping.
Assign a VC profile to use for policing this channel's upstream
=
traffic. The IES-708-22A does not perform upstream traffic
policing if you do not specify an upstream VC profile.
IES-708-22A User's Guide