2 Using a #2 Phillips screwdriver, install the M3 flat head screws through the mounting
bracket holes into the IES-708-22A.
3 Repeat steps
708-22A.
4 You may now mount the IES-708-22A on a rack. Proceed to the next section.
2.2.3 Mounting the IES-708-22A on a Rack
1 Position a mounting bracket (that is already attached to the IES-708-22A) on one side of
the rack, lining up the two screw holes on the bracket with the screw holes on the side of
the rack.
Figure 6 Mounting the IES-708-22A on a Rack
2 Using a #2 Phillips screwdriver, install the M5 flat head screws through the mounting
bracket holes into the rack.
3 Repeat steps
IES-708-22A User's Guide
1
and
2
to install the second mounting bracket on the other side of the IES-
example
1
and
2
to attach the second mounting bracket on the other side of the rack.
Chapter 2 Hardware Installation and Connection
47