Dsl Port Linerate Command; Table 94 Dsl Port Linerate Command Counters - ZyXEL Communications IES-22A User Manual

where
[portlist]
This command displays DSL port connection statistics including the wire pair, status (V for
enabled, - for disabled), actual rate, up time and the number of errored seconds.
The following example displays connection statistics for port 1.
ras> statistics shdsl show 1
port wire pair status
---- --------- ------ ----------- -------------- ---------------------
1 2wire

53.2.2 DSL Port Linerate Command

Syntax:
ras> statistics shdsl linerate <portlist>
where
<portlist>
This command shows the transmission rates on a DSL port.
An example is shown next.
ras> statistics shdsl linerate 1
[port 1]
link
min rate
max rate
actual rate
noise margin
attenuation
linkup count
The following table explains these counters.

Table 94 DSL Port Linerate Command Counters

LABEL
link
min rate
max rate
IES-708-22A User's Guide
You can specify a single DSL port <1>, all DSL ports <*> or a
=
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
actual rate
(kbps) up time
V 3776 00000:20:44:20
You can specify a single DSL port <1>, all DSL ports <*> or a
=
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
= link_up
= 5696 kbps
= 5696 kbps
= 3776 kbps
= 26 dB
= 1 dB
= 1
DESCRIPTION
This displays the connection status of the DSL link.
This is the minimum rate (in Kbps) of the DSL line.
This is the maximum rate (in Kbps) of the DSL line.
Chapter 53 DSL Commands
error second(15M/24H)
0/0
335