Route Delete Command; Route Show Command - ZyXEL Communications IES-22A User Manual

where
<dst ip>
[/netmask]
<gateway ip>
[metric]
<name>
default
This command defines a new, static IP forwarding route or edits an existing one.

50.3.4 Route Delete Command

Syntax:
ras> ip route delete <dst ip>[/netmask]
where
<dst ip>
[/netmask]
This command removes a static, IP forwarding route.

50.3.5 Route Show Command

Syntax:
ras> ip route show
This command displays the IES-708-22A's routing table.
An example is shown next.
ras> ip route show
index dest
----- --------------- --------------- ------ -------------------------------
1 192.168.1.0/24
2 default
IES-708-22A User's Guide
The destination IP address of packets that this static route is to
=
route.
The destination subnet mask of packets that this static route is to
=
route.
The IP address of the gateway that you want to send the packets
=
through.
The metric (hop count) of this static route.
=
A name to identify this static route. Up to 31 English keyboard
=
characters. Spaces and tabs are not allowed.
Use this to configure the IES-708-22A's default route.
=
The destination IP address of packets to which this static route
=
applies.
The destination subnet mask of packets to which this static route
=
applies.
gateway metric name
192.168.1.1
192.168.1.254
Chapter 50 IP Commands
1
1
317