Igmp Snoop Info Statistics Command; Igmp Group Statistics Command; Igmp Port Info Statistics Command - ZyXEL Communications IES-22A User Manual

Chapter 48 IGMP Commands

48.7.1 IGMP Snoop Info Statistics Command

Syntax:
ras> statistics igmpsnoop info [clear]
This command displays the current IGMP settings and the number of IGMP-related packets
received. The following figure shows an example.
ras> statistics igmpsnoop info
IGMP Snooping/Proxy is Disable
number of query
number of report
number of leave
number of groups

48.7.2 IGMP Group Statistics Command

Syntax:
ras> statistics igmpsnoop group [<vid> <mcast_ip>]
where
<vid>
<mcast_ip>
This command displays the information about IGMP groups learned on the system, specified
VLAN, or specified multicast address on the specified VLAN(s).
ras> statistics igmpsnoop group
[group info]
group
--------------- ---- -------- --

48.7.3 IGMP Port Info Statistics Command

Syntax:
ras> statistics igmpsnoop port info [<portlist> [clear]]
where
<portlist>
clear
308
= 0
= 0
= 0
= 0
The VLAN ID [1 – 4094].
=
The multicast IP address.
=
vid port
You can specify a single DSL port <1>, all DSL ports <*> or a
=
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
Clears the IGMP port info statistics on the specified ports.
=
IES-708-22A User's Guide