Table of Contents
Advertisement
Chapter 39 Diagnostic
The following table describes the labels in this screen.
Table 86 Management > Diagnostic
LABEL
Syslog/ Event Log
IP Ping
Loopback Test
240
DESCRIPTION
Click Display to display a log of events in the multi-line text box.
Click Clear to empty the text box and reset the log.
Type the IP address of a device that you want to ping in order to test a
connection.
In the field to the right specify the number of times that you want to ping the IP
address.
Click Ping to have the device ping the IP address (in the field to the left).
Select a port number from the Port drop-down list box and enter a VPI/VCI to
specify a PVC. Click OAM F5 Loopback to perform an OAMF5 loopback test
on the specified DSL port. An Operational, Administration and Maintenance
Function 5 test is used to test the connection between two DSL devices. First,
the DSL devices establish a virtual circuit. Then the local device sends an ATM
F5 cell to be returned by the remote DSL device (both DSL devices must
support ATM F5 in order to use this test). The results ("Passed" or "Failed")
display in the multi-line text box.
IES-708-22A User's Guide
Advertisement
Table of Contents
Troubleshooting
