Rpvc Gateway Delete Command; Rpvc Set Command - ZyXEL Communications IES-22A User Manual

Chapter 54 Virtual Channel Management

54.5.4 RPVC Gateway Delete Command

Syntax:
ras> shdsl rpvc gateway delete <gateway ip>
where
<gateway ip>
This command removes a gateway IP address that the device was set to use for 2684 routed
mode traffic.
The following example has the device remove a 2684 routed mode traffic gateway entry for IP
address 192.168.10.102.
ras> shdsl rpvc gateway delete 192.168.10.102

54.5.5 RPVC Set Command

Syntax:
ras> shdsl rpvc set <portlist> <vpi> <vci> <DS vcprofile[,US vcprofile]>
<ip>/<netmask> <gateway ip>
where
<portlist>
<vpi>
<vci>
DS vcprofile
[,US
vcprofile]>
<ip>
356
The IP address of the gateway to which you no longer want the
=
device to send the traffic that the system receives from this
PVC. Enter the IP address in dotted decimal notation.
The port(s) of the RPVC.
=
You can specify a single DSL port <1>, all DSL ports <*> or a
list of DSL ports <1,3,5>. You can also include a range of ports
<1,5,6~8>.
The VPI of the RPVC.
=
The VCI of the RPVC.
=
Assign a VC profile to use for this channel's downstream traffic
=
shaping.
Assign a VC profile to use for policing this channel's upstream
=
traffic. The IES-708-22A does not perform upstream traffic
policing if you do not specify an upstream VC profile.
The subscriber's CPE WAN IP address in dotted decimal
=
notation.
IES-708-22A User's Guide