Acl Assignment Show Command - ZyXEL Communications IES-22A User Manual

where
<portlist>
<vpi>
<vci>
<profile>
This command allows you to remove an ACL profile from the specified PVC.

55.2.3 ACL Assignment Show Command

Syntax:
ras> switch acl show [<portlist>] [<vpi> <vci>]
where
<portlist>
<vpi>
<vci>
This command displays the current ACL profiles applied to the specified PVC(s). The
following figure shows an example.
ras> switch acl show
port vpi
---- --- ----- ---- --------------------------------
1 0
IES-708-22A User's Guide
The port number of the PVC. You can specify a single DSL port
=
<1>, all DSL ports <*> or a list of DSL ports <1,3,5>. You can
also include a range of ports <1,5,6~8>.
The VPI of the PVC.
=
The VCI of the PVC.
=
The name of the ACL profile.
=
The port number of the PVC. You can specify a single DSL port
=
<1>, all DSL ports <*> or a list of DSL ports <1,3,5>. You can
also include a range of ports <1,5,6~8>.
The VPI of the PVC.
=
The VCI of the PVC.
=
vci type profile
33 PVC test
Chapter 55 ACL Commands
373