Alarm History Show Command; Alarm History Clear Command - ZyXEL Communications IES-22A User Manual

Table 91 Log Format (continued)
LABEL
syslog
severity
clearable

44.8 Alarm History Show Command

Syntax:
ras> alarm history show [<severity>|all] [<alarm>|all] [<condition>|all]
[<sdate>|all] [<edate>|all] [for|rev] [detail]]
where
<severity>
<alarm>
<condition>
<sdate>
<edate>
[for|rev]
[detail]
This command displays historic alarms by severity, alarm category, alarm condition and/or
dates.
The following example displays the historic major and critical level alarms.
ras> alarm history show major
no alarm
------ ------
1 enet
2 enet

44.9 Alarm History Clear Command

Syntax:
ras> alarm history clear <alarm>|all <condition>|all
ras> alarm history clear <severity>
IES-708-22A User's Guide
DESCRIPTION
This displays "V" if the system is to send this alarm to a syslog server. It displays
"-" if the system does not send this alarm to a syslog server.
This is the alarm severity level (critical, major, minor or info).
This displays "V" if the alarm clear command removes the alarm from the
system. It displays "-"if the alarm clear command does not remove the alarm
from the system.
Alarm severity. info|minor|major|critical
=
Alarm category. sys|eqpt|enet|dsl|voip
=
Text description for the condition.
=
Start date (yyyy/mm/dd)
=
End date (yyyy/mm/dd)
=
Display order. for: forward; rev: reverse.
=
Display in-depth alarm information.
=
condition
-------------------- -------- -------------- -------
+down
-down
Chapter 44 Alarm Commands
severity timestamp
major 01/01 00:00:08 enet 1
major 01/01 00:00:11 enet 1
source
273