AJAX Button S Jeweller Manual page 7

Before adding a device
1. Install an Ajax PRO app
2. Create an account
make the necessary settings, and create at least one
3. Ensure the hub is switched on and has internet access via Ethernet, Wi-Fi
and/or mobile network.
4. Ensure the hub is disarmed and does not start updates by checking its
status in the Ajax app.
This product line is developed for projects. Only accredited Ajax Systems partners can
install, and administer Superior products.
Connecting to the hub
1. Open the Ajax PRO app
2. Go to the Devices
3. Name the button, scan, or type in the QR code (placed on the button and the
package box), and select a room and a group (if
4. Press Add.
5. Hold the button for 7 seconds. When Button S is added, the LEDs will ash
green once.
Note that if the maximum number of devices has already been added to the hub
( depending on the hub model
one.
The button connected to the hub will appear in the list of hub devices in the Ajax
app.
Button S works with one hub. When connected to a new hub, the button stops
sending events to the old one. When added to a new hub, the button is not
.
if you don't have one. Add a compatible hub to the app,
. Select the hub where you want to add the button.
tab and click Add Device.
), you will be noti ed when you try to add a new
virtual room .
Group mode is enabled).