AJAX Button S Jeweller Manual page 11

Permanent Deactivation
One-Time Deactivation
Firmware
Device ID
Device No.
Settings
To change Button S settings in the PRO Ajax apps:
1. Go to the Devices
2. Select Button S from the list.
3. Go to Settings by clicking on the gear icon
4. Set the required parameters.
5. Click Back to save the new settings.
Parameter
Name
Displays the device's status: active or
completely disabled by the user.
Shows the status of the device one-time
deactivation setting:
Learn more
Button S rmware version.
Device identi er. Also available on the device's
board and its package.
Number of the device loop (zone).
tab.
Name of the device, can be changed.
no more than 0.5 seconds.
No — the device operates in the normal
mode.
Entirely — the button is entirely excluded
from the operation of the system for a time
the armed mode is active. The device does
not report alarms or other events.
.
Value