MDT Technologies KNX Glass Push Button II Lite Technical Manual page 52

Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]
LED reacts to: external object
If this setting is selected, various datapoint types can be chosen to which the status LED should react to:
1 Bit DPT 1.001 Switch:
■
"OFF".
1 Byte DPT 5.001 Percent (0...100 %): The value is specified here from which the LED switches to
■
"ON". If the specified value is reached, the LED is switched on, and if the value is below the set value,
the LED is switched off.
1 Byte DPT 5.001 Decimal factor (0...255):
■
LED should light up and, if so, which colour it should be:
Value Colour
0 Off (Black)
1 White
2 Red
3 Green
4 Blue
5 Yellow
6 Pink
7 Cyan
Table 43: Assignment of LED colour to decimal value
Day/Night
Each LED can assume different colours, brightnesses and behaviours for Day and Night mode. The
switchover is dependent on the "Day/Night" communication object.
The following table shows the associated communication objects:
No. Name/Object function
62 LED 1 – Switch, Percent value, Decimal value 1 Bit
+1 next LED
Table 44: Communication objects – LED 1 - 4
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
The LED behaves like the object. The states can be configured if "ON" and
The values from 0 to 7 can be used to specify whether the
Length Usage
Control of LED.
1 Byte
52 / 63