Subfunction: Send Status - MDT Technologies KNX Glass Push Button II Lite Technical Manual

Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]

4.3.2.4 Subfunction: Send status

Single-button function
;
With this function, fixed values can be sent for a pressed button (rising edge) and a released button (falling
edge).
In addition, it is possible to set a delay for the released button. This means that the value for the pressed
button is sent immediately, but the value for the released button after a delay.
For example, a light can be switched on when the button is pressed, but the light remains on for a few
seconds after the button is released. This time is then left, for example, to leave a room without being in
the dark.
The following table shows the available communication object:
No. Name/Object function
0 PB1: – Send status
Table 15: Communication objects – Single-button function Switch – Subfunction: Send status
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
Length Usage
1 Bit Switch function.
26 / 63