MDT Technologies KNX Glass Push Button II Lite Technical Manual page 28

Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]
ETS Text
Group long sends
■
■
■
Group extra long
■
keypress
■
Group extra long
■
sends
■
■
Time for long
keypress
Time for extra long
keypress
"Special function" → "additional object"
Datapoint type
■
(2. object)
■
■
■
■
■
■
■
■
Colour control
■
■
Value
button 1 (3) / 2 (4)
Scene number
button 1 (3) / 2 (4)
Value
Scene number
RGB value
HSV value
Table 16: Settings – Send values – Subfunction: Send values
Note: For details on the innovative group control, see
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
Dynamic range
[Default value]
value for upper/left and lower/right
button
only value for upper/left button
only value for lower/right button
not active
active
value for upper/left and lower/right
button
only value for upper/left button
only value for lower/right button
basic setting
0,1 s - 30,0 s
0,1 s - 30,0 s
[2,0 s]
1 Bit DPT 1.001 Switch
2 Bit DPT 2.001 Forcible control
1 Byte DPT 5.001 Percent (0...100%)
1 Byte DPT 5.005 Decimal factor (0...255)
1 Byte DPT 17.001 Scene number
2 Byte DPT 7.600 Colour temperature (K)
2 Byte DPT 9.001 Temperature (°C)
2 Byte DPT 9.004 Brightness (Lux)
3 Byte DPT 232.600 RGB value
RGB
HSV
any value
according to set datapoint type
any value
according to set datapoint type
Comment
Setting, which button is to send
when the button is pressed long.
Only for two-button function.
** see note below table.
Activation of the group for extra
long keypress.
Setting, which button is to send
when the button is pressed long.
Only for two-button function.
** see note below table.
Setting of an individual time from
when a long keystroke is detected.
Setting of an individual time from
when an extra long keypress is
detected.
Setting the type of datapoint to be
sent.
Selection of colour system.
Only for "RGB value".
Setting the value/scene number to
be sent.
Only for two-button function.
Setting the value/scene number to
be sent.
Only for single-button function.
4.3.2 Switch (General).
28 / 63