Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]
ETS Text
Action on long
■
keypress
■
■
■
■
■
Time for long
keypress
Switching type
■
■
Table 18: Settings – Send values – Subfunction: Toggle values/scenes
Functional principle
This function can send up to 4 different values when a button is pressed shortly. The values are toggled
one after the other. Depending on the set parameters, for example, when the button is pressed, the 2nd
toggle value is sent if the 1st toggle value was previously sent and the 3rd toggle value if the 2nd toggle
value was previously sent.
Delay between switchovers
With this setting, the sending of the telegram is delayed by the set time after the button is pressed. If you
press the button again during the delay time, the next toggle value is activated immediately and the delay
time is restarted. If, for example, you want to go directly from the 1st toggle value to the 3rd toggle value
without activating the second one - with a delay time of 2 seconds - press the key twice within 2 seconds.
Long keypress
The parameter "Long keypress" can be used to transmit a fixed value for a long keypress in addition to the
changeover by a short keypress.
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
Dynamic range
[Default value]
1.-4. Toggle value
4. Toggle value if 1. Toggle value was
previously set, otherwise 1. Toggle value
send "0"
"OFF" to second object
"ON" to second object
save scene
[1. Toggle value]
basic setting
0,1 s - 30,0 s
limit stop (after the last value, this is
repeated)
overrun (after the last value, the first
value is sent again)
Comment
Setting the action with long
keypress.
Number of possible switching
values according to the selection
"Number of values".
Only with single-button function
and when "Long keypress" is
active.
Setting of a time from when a long
keystroke is detected.
Setting what should happen if the
last toggle value is reached.
Only with two-button function.
31 / 63
Need help?
Do you have a question about the KNX Glass Push Button II Lite and is the answer not in the manual?