Switch/Send Values Short/Long (With 2 Objects) - MDT Technologies KNX Glass Push Button II Lite Technical Manual

Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]

4.3.4 Switch/send values short/long (with 2 objects)

Single-button function

Two-button function

With this function, 2 different values can be sent for the short and long button. The short and the long
button have different objects, whereby it is also possible to send out different datapoint types.
The following table shows the available settings:
ETS Text
Action on short
■
keypress
■
■
■
■
■
Two-button function: If "Action short keypress" → "Switch"
Value button 1/3
■
■
Value button 2/4
■
■
If "Action on short keypress" → "Send values"
Datapoint type
■
■
■
■
■
■
■
■
Colour control
■
■
Value
Scene number
RGB value
HSV value
Value
button 1/2 (3/4)
Scene number
button 1/2 (3/4)
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
Dynamic range
[Default value]
switch
switch OFF
switch ON
toggle
send values
not active
OFF
ON
OFF
ON
2 Bit DPT 2.001 Forcible control
1 Byte DPT 5.001 Percent (0...100%)
1 Byte DPT 5.005 Decimal factor (0...255)
1 Byte DPT 17.001 Scene number
2 Byte DPT 7.600 Colour temperature (K)
2 Byte DPT 9.001 Temperature (°C)
2 Byte DPT 9.004 Brightness (Lux)
3 Byte DPT 232.600 RGB value
RGB
HSV
any value
according to set datapoint type
any value
according to set datapoint type
Comment
Setting the function for the short
keypress.
"switch" only for two-button
function.
"switch ON" and "switch OFF"
only for single-button function.
Setting the value to be sent.
Setting the value to be sent.
Setting the type of datapoint to be
sent.
Selection of colour system.
Only for "RGB value".
Setting the value/scene number to
be sent.
Only for single-button function.
Setting the value/scene number to
be sent.
Only for two-button function.
38 / 63