Slap/Cleaning Function - MDT Technologies KNX Glass Push Button II Lite Technical Manual

Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]

4.3.8 Slap/Cleaning function

The following table shows the available settings:
ETS Text
Cleaning function
■
■
■
Slap function for
■
short keypress
■
■
■
■
Datapoint type
■
■
■
■
■
■
■
■
Colour control
■
■
Value
Scene number
RGB value
HSV value
The settings for the "Slap function for long keypress" behave in a similar way.
Time for long
keypress
Display behaviour of
LEDs
Lock object
■
■
Table 37: Settings – Slap/Cleaning function
Note:
The Slap/Cleaning function is activated by pressing 3 or more buttons at the same time.
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
Dynamic range
[Default value]
cleaning not active, slap active
cleaning = long button,
slap = short button
cleaning = short button, slap = long
button
switch OFF
switch ON
toggle
send values
not active
2 Bit DPT 2.001 Forcible control
1Byte DPT 5.001 Percent (0...100%)
1Byte DPT 5.005 Decimal factor (0...255)
1Byte DPT 17.001 Scene number
2Byte DPT 7.600 Colour temperature (K)
2Byte DPT 9.001 Temperature (°C)
2Byte DPT 9.004 Brightness (Lux)
3Byte DPT 232.600 RGB value
RGB
HSV
any value
according to set datapoint type
basic setting
0,1 s - 30,0 s
off, red, green, yellow, [blue],
white, Slap function not signalled via LEDs
not active
active
Comment
Activation of the Cleaning-/Slap
function and setting if activation via
short or long keypress.
Setting the value to be sent for the
"short keypress" slap function.
Setting the datapoint type for the
value to be sent.
Only if "Slap function for short
keypress" → "send values".
Selection of colour system.
Only for "RGB value".
Setting the value/scene number to
be sent.
Setting of a time from when a long
keystroke is detected.
pink, cyan, LED display behaviour if the slap
function is active.
Activation of the lock object for the
slap function.
46 / 63