Send Values; Subfunction: Send Values - MDT Technologies KNX Glass Push Button II Lite Technical Manual

Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]

4.3.3 Send values

4.3.3.1 Subfunction: Send values

Single-button function

Two-button function

With this function, different values of a datapoint type can be sent.
The following table shows the available settings:
ETS Text
Datapoint type
■
■
■
■
■
■
■
■
■
Colour control
■
■
Value button 1 (3)
Scene number
button 1 (3)
Value button 2 (4)
Scene number
button 2 (4)
Value
Scene number
RGB value
HSV value
Special function
■
■
"Special function" → "innovative group control"
Group long keypress
■
■
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
Dynamic range
[Default value]
1 Bit DPT 1.001 Switch
2 Bit DPT 2.001 Forcible control
1 Byte DPT 5.001 Percent (0...100%)
1 Byte DPT 5.005 Decimal factor (0...255)
1 Byte DPT 17.001 Scene number
2 Byte DPT 7.600 Colour temperature (K)
2 Byte DPT 9.001 Temperature (°C)
2 Byte DPT 9.004 Brightness (Lux)
3 Byte DPT 232.600 RGB value
RGB
HSV
any value
according to set datapoint type.
any value
according to set datapoint type
any value
according to set datapoint type.
innovative group control
additional object
not active
active
Comment
Setting the type of datapoint to be
sent.
Selection of colour system.
Only for "RGB value".
Setting the value/scene number to
be sent.
Only for two-button function.
Setting the value/scene number to
be sent.
Only for two-button function.
Setting the value to be sent for the
button.
Only for single-button function.
Selection of the special function.
Activation of the group for long
keypress.
27 / 63