MDT Technologies KNX Glass Push Button II Lite Technical Manual page 29

Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]
** Note: The 4 gang push-button allow you to set the button orientation to either "horizontal (left/right)"
or "vertical (top/bottom)". The settings for "Group long sends" and "Group extra long sends" can vary
between "... upper/lower button" or "... left/right button".
Additional Object
When selecting "additional object", another
different values to two separate objects when pressing a button. For example, a dimming value in "%" can
be sent to a dimming actuator with the first object and at the same time an "RGB value" to an LED
controller with the second object.
The following table shows the associated communication objects:
No. Name/Object function
0 PB1: –
PB1/2: – Switch, Scene ...
2 PB1: (2. object) –
PB1/2: (2. object) –
Switch, Scene ...
2 PB1: Group long –
PB1/2: Group long –
Switch, Scene ...
4 PB1: Group extra long –
PB1/2: Group extra long –
Switch, Scene ...
Table 17: Communication objects – Send values – Subfunction: Send values
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
communication object appears. It is possible here to send
Length Usage
Switch function of the button(s).
DPT depending on the parameter setting.
Switch function of the button(s) on the second object.
DPT depending on the parameter setting.
Switch function with long keystroke.
DPT depending on the parameter setting.
Switch function with extra long keystroke.
DPT depending on the parameter setting.
29 / 63