Button Functions - General - MDT Technologies KNX Glass Push Button II Lite Technical Manual

Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]
4.2 Button functions – General
In the "Button functions"
The following table shows the available settings:
ETS Text
Button orientation
■
■
Buttons 1/2
■
(left top/bottom)
■
Buttons 3/4
(right top/bottom)
■
■
Buttons 1/2
■
(top left/right)
■
Buttons 3/4
■
(bottom left/right)
Slap/Cleaning
■
function
■
Reaction time on
■
keypress
■
■
Time for long keypress
(Basic setting)
Table 9: Settings – Button functions
Button orientation
(only BE-GTL4xx.01)
With the 4 gang buttons, you can choose whether the rocker is aligned horizontally (side by side) or
vertically (one above the other) for the two-button function.
For single-button functions, the orientation changes the sequence. Button 1 is always at the top left,
button 2 would be at the bottom left if the buttons were vertical, but at the top right if they were horizontal.
Buttons 3 and 4 are aligned accordingly.
Note: The assignment of the status LEDs automatically adapts to the orientation. LED 1 is always assigned
to button 1, LED 2 is assigned to button 2, etc.
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
menu, the single buttons can be activated/deactivated and grouped.
Dynamic range
[Default value]
vertical (top/bottom)
horizontal (left/right)
not active
single-button function
(2 functions, top/bottom)
single-button function
(1 function, top/bottom together)
two-button function
not active
single-button function
two-button function
not active
active
fast
medium
slow
0,1 - 30 s
[0,4 s]
Comment
Setting the button orientation/
assignment.
Only available for BE-GTL4xx.01 .
Setting the functions for the pair of
buttons.
If "Button orientation" → "vertical (top/
bottom)".
Setting the functions for the pair of
buttons.
If "Button orientation" → "horizontal
(left/right)".
Activates the slap/cleaning function.
Setting the reaction time or debounce
time for the buttons.
Setting from when a long keypress is
detected.
20 / 63