Step 9 : Initial setup
1
2
3
4
NOTE: "Time setting" and "Comm. Line" settings are not appear according to the
Installation_Manual.indd
13
Press <Setting> on the control panel, < >, <0>, <2> to initialize the
memory.
When the confirmation message appears, press [Yes].
Press <Setting> on the control panel and then press [User Install].
When the first screen has been entered, press [Prev] or [Next] to move to
the second screen.
Select each item and adjust the setting(s) to your preference. After adjust-
ing the setting, press [Enter] to save it.
country.
Installation Manual
2007/04/27
12:11:39