Multitech MultiVOIP 400 MVP400 User Manual page 25

Standalone voice/ip gateway proprietary mode

Hide thumbs Also See for MultiVOIP 400 MVP400:

Table of Contents

5. The Welcome dialog box displays.

Click Next to continue.

6. Follow the on-screen instructions to install your MultiVOIP software.

You may choose the Destination Location of your MultiVOIP software or you can accept the

default destination by clicking Next. If you click Browse, you can choose from several folders.

Accepting the default destination is recommended.

7. The following dialog box selects the COM port of your PC connected to the Command port of the

MultiVOIP. From the Select Port list, select the COM port of your PC.

Click OK to continue.

8. The Setup Complete dialog displays.

Click Finish to continue.

Chapter 3 - Software Loading and Configuration

Table of Contents

Need help?

Do you have a question about the MultiVOIP 400 MVP400 and is the answer not in the manual?

Multivoip mvp400