Using The Cursor On The Panel; Man Overboard Waypoint - Lowrance Hook Reveal X Series Operator's Manual

Numeric and alphanumeric keyboards are automatically displayed
when required for entering user information in dialogs.
A dialog is closed by saving or cancelling the entry. A dialog can
also be closed by pressing the Exit (X) key.

Using the cursor on the panel

The cursor can be used to mark a position, and to select items.
By default, the cursor is not shown on the panel.
Display the cursor by pressing the Cursor/Waypoint key and use the
Arrow keys to move the cursor on the panel.
When the cursor is active on the GPS panel, the cursor position
window is displayed. The bottom line of the window shows the
distance and heading from the vessel to the cursor.
When the cursor is active on the sonar panel, the window also
shows the depth and temperature at the cursor.
To remove the cursor and cursor elements from the panel, press the
Cursor/Waypoint key.

Man Overboard waypoint

If an emergency situation should occur, you can save a Man
Overboard (MOB) waypoint at the vessel's current position.
Create a MOB
To create a Man Overboard (MOB) waypoint:
• Simultaneously press the Zoom In (+) and Zoom out (-) keys
When you activate the MOB function, the following actions are
automatically performed:
• A MOB waypoint is created at the vessel's position
• The display switches to a zoomed chart panel, centered on the
vessel's position
• The system displays navigation information back to the MOB
waypoint
Multiple MOB waypoints can be created. The vessel continues to
show navigation information to the initial MOB waypoint.
Navigation to subsequent MOB waypoints needs to be done
manually.
Basic operation | Hook Reveal X Series Operator Manual
17