Fishtrack; Alarms; Fish Alarm - Lowrance X-4 Pro Installation And Operation Instructions Manual

Fish I.D. mode and without to become more familiar with the feature.
This unit's default Fish I.D. setting is on.
Fish I.D. is most handy when you are in another part of the boat or per-
forming some task that prevents you from watching the sonar screen.
Then, you can turn on Fish I.D. and the audible fish alarm. When that
lunker swims under your boat, you will hear it!
Fish I.D. can also be useful when you want to screen out some of the so-
nar detail gathered by your unit. For example, it can help cut through
the clutter of suspended bubbles caused by wave action or boat wakes.
To turn Fish I.D. off, repeatedly press
pears. Press
↓
the above steps, but press

FishTrack™

The FishTrack™ feature shows the depth of a fish symbol when it ap-
pears on the display. To turn it on, repeatedly press
menu appears. Press
ID
off, repeat the steps above, but press
If you want to turn off FishTrack depths but leave Fish I.D. on, press
to select , then press
O
N
to use the FishTrack feature.
Fish ID menu and symbol with FishTrack on. The fish is 44 feet deep.

Alarms

The sonar unit has four types of alarms: fish, shallow, deep and bat-
tery.

Fish Alarm

The Fish Alarm sounds a tone when a fish symbol appears on the
screen. The Fish I.D. feature must be turned on for fish alarms to work.
to select , then press
O
FF
to select
↑
to select
↑
PWR
MENU
PWR
.
O
N
T O
RACK N
to select
↓
. Remember, Fish I.D. must be on in order
34
until the
F
ISH
. To turn it back on, repeat
MENU
, then press
PWR
.
O
FF
Fish I.D. symbols
showing FishTrack
depth indicator
menu ap-
ID
until the
F
ISH
. To turn it
↓